Tank Mounts that eliminate Row crop interference Series 3000 - 6000 900 - 1200 Gallon Capacity    200, 300, 400 Gallon Tanks Parallel side mounts provide good row visibility One step ladder provides easy, safe access Heavy 7"x 7"x  3/8" tube supports tank saddle, newly designed side plates eliminate row interference Hi-density tanks are standard with a limited three year warranty. Each has 1 1/4" & 3/4" outlet.

Agri-Products has designed and developed tank mounts to increase agricultural productivity and efficiency. Design considerations include cab access, operator visibility, tractor frame design, tractor wheel/axle design, and ease of mounting. Heavy nylon tank straps are included to assure proper tank mounting.

The Unique Design  results in a tractor side plate with minimum interference for growing row crops. This new design also makes it easier to remove and mount the saddle tube. The heavy plate under truss helps distribute the load over a greater area and adds to the stability of the tank mount system. Bolting the saddle tube onto the side plates with 10, grade 5 bolts makes it secure but easy to remove assembly.

Up Grading and Field Testing ...
Look carefully at these features, constant upgrading and 
field testing gives you the best for your money.

New design on FRONT MOUNT distributes the load evenly over the entire length of the weight bracket. Heavy steel brace attaches the saddle to the tractor frame. Fitting under  the weight bracket keeps the hook set in place. Eight,  grade-5 bolts secure the saddle to the hook set.
	Tubes in place with bottom bolt in place  so that tube can be pivoted into place and balance of bolts installed.
. The saddle is secured to the 7" x 7" x 3/8" tube with  two U-bolts. The hollow tube can be used to house  the plumbing.
	The under truss distributes the load from  the side plates. Allowance has been made for the front drive shaft.
. A one step ladder is standard on all tank mounts assuring safe and easy access to the tractor cab.